Skip Navigation


Forestry Advance Access originally published online on June 19, 2008
Forestry 2008 81(3):243-258; doi:10.1093/forestry/cpn027
This Article
Right arrow Full Text
Right arrow Full Text (PDF)
Right arrow All Versions of this Article:
81/3/243    most recent
cpn027v2
cpn027v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in ISI Web of Science
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Gromke, C.
Right arrow Articles by Ruck, B.
Right arrow Search for Related Content
Social Bookmarking
Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

© Institute of Chartered Foresters, 2008. All rights reserved. For Permissions, please email: journals.permissions@oxfordjournals.org

This article appears in the following Forestry issue: Wind and Trees Special Issue [View the issue table of contents]

Aerodynamic modelling of trees for small-scale wind tunnel studies

Christof Gromke* and Bodo Ruck

Laboratory of Building and Environmental Aerodynamics, Institute for Hydromechanics, University of Karlsruhe, 76128 Karlsruhe, Germany

* Corresponding author. E-mail: gromke{at}ifh.uka.de


  Abstract

In building and environmental aerodynamics, wind tunnel studies of natural vegetative structures like bushes or trees have to be modelled. From a fluid mechanical point of view, these structures differ essentially from man-made constructions because of their structural flexibility and permeability. Whereas the small-scale modelling of technical structures is widely known, a lack of knowledge exists in an adequate modelling of vegetative structures. In this article, aerodynamic characteristics of inflexible model trees with crowns of varying porosity are presented. Drag force and flow field measurements were performed in a uniform or boundary layer flow, respectively. The force measurements delivered drag coefficients in the range of 0.8–1.2. This is in good accordance with natural trees for low wind velocities (<10 m s–1). Flow field measurements show typical wake characteristics of permeable structures with recirculation zones being extended or even detached when compared with impermeable bodies. By means of spectral analysis, an energy shift from lower to higher frequencies, i.e. a breakdown of larger eddy structures into smaller eddies, in the crown wake region was found.

Received 30 July 2007.
Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.